Institutions of the University of Bayreuth
Chair Polymer Materials - Univ.-Prof. Dr.-Ing. Holger Ruckdäschel

2025

Rothenhäusler, Florian ; Hüser, Daniel ; Ruckdäschel, Holger:
Curing reactions, reaction kinetics, and latency of epoxy resin cured with L-tryptophan and L-tyrosine.
In: Journal of Applied Polymer Science. Vol. 142 (2025) Issue 4 . - e56410.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.56410

Szpoganicz, Eduardo ; Hübner, Fabian ; Beier, Uwe ; Geistbeck, Matthias ; Ruckdäschel, Holger:
The effect of prepreg ply thickness in carbon fiber reinforced composites on intralaminar toughness and shear strength in cryogenic environments for liquid hydrogen storage tanks.
In: Composites Part B: Engineering. Vol. 292 (2025) . - 112077.
ISSN 1359-8368
DOI der Verlagsversion: https://doi.org/10.1016/j.compositesb.2024.112077

Gerlach, Michael ; Koedel, Justus ; Seibt, Sebastian ; Baumgärtner, Benjamin ; Callsen, Christoph ; Voss, Gundula ; Puchtler, Florian ; Weidinger, Andy ; Puchas, Georg ; Leykam, Daniel ; Altstädt, Volker ; Schobert, Rainer ; Ruckdäschel, Holger ; Biersack, Bernhard:
The influence of substituted indigo derivatives on the preparation and properties of “Maya” pigments.
In: Dyes and Pigments. Vol. 233 (2025) . - 112530.
ISSN 0143-7208
DOI der Verlagsversion: https://doi.org/10.1016/j.dyepig.2024.112530

2024

Rothenhäusler, Florian ; Ruckdäschel, Holger:
Aromatic amino acids as latent, bio-based curing agents and toughening agents for epoxy resins.
In: Journal of Applied Polymer Science. Vol. 141 (2024) Issue 16 . - e55250.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.55250

Kuhnigk, Justus:
Aufklärung von Struktur-Eigenschafts-Beziehungen beim Schäumen und Diffusions-Verschweißen von Polybutylenterephthalat-Partikelschäumen (E-PBT).
Bayreuth , 2024 . - XI, 167 P.
( Doctoral thesis, 2024 , University of Bayreuth, Faculty of Engineering Science)

Brütting, Christian ; Dreier, Julia ; Bonten, Christian ; Ruckdäschel, Holger:
Biobased Immiscible Polylactic Acid (PLA) : Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Impact of Rheological and Non-isothermal Crystallization on the Bead Foaming Behavior.
In: Journal of Polymers and the Environment. Vol. 32 (2024) Issue 9 . - pp. 4182-4195.
ISSN 1572-8919
DOI der Verlagsversion: https://doi.org/10.1007/s10924-024-03186-9

Kayßer, Simon Tino:
Carbamat-geschäumte Epoxidharze – Optimierung von Brandverhalten und Mechanik durch Füllstoffe.
Bayreuth , 2024 . - XIV, 192 P.
( Doctoral thesis, 2024 , University of Bayreuth, Faculty of Engineering Science)

Bethke, Christian:
Carbamat-geschäumte Epoxidharze : Synthese und Eigenschaften.
Bayreuth , 2024 . - XI, 168 P.
( Doctoral thesis, 2024 , University of Bayreuth, Faculty of Engineering Science)

Meuchelböck, Johannes ; Koch, Ilja ; Grüber, Bernd ; Müller-Pabel, Michael ; Gude, Maik ; Ruckdäschel, Holger:
Compression testing of EPP bead foams in a vacuum chamber : Experimental investigation on the influence of the cell gas.
In: Polymer Testing. Vol. 132 (2024) . - 108388.
ISSN 1873-2348
DOI der Verlagsversion: https://doi.org/10.1016/j.polymertesting.2024.108388

Weingart, Nick:
Entwicklung eines kontinuierlichen Schäumprozesses für neuartige expandierte und expandierbare Polycarbonat-Partikel-schäume in struktureller Anwendung.
Bayreuth , 2024 . - V,144 P.
( Doctoral thesis, 2023 , University of Bayreuth, Faculty of Engineering Science)

Standau, Tobias ; Lindner, Kathrin ; Altstädt, Volker ; Ruckdäschel, Holger:
Evaluation of the potential of polybutylene terephthalate/Poly(phenylene oxide) blends for bead foam production.
In: AIP conference proceedings. Vol. 3158 (2024) Issue 1 . - 050001.
ISSN 0094-243X
DOI der Verlagsversion: https://doi.org/10.1063/5.0204862

Töpfer, Christian ; Dippold, Marcel ; Ruckdäschel, Holger:
Influence of dielectric properties of polybutylene terephthalate and respective foam beads on process behavior in radio-frequency welding.
In: Journal of Applied Polymer Science. Vol. 141 (2024) Issue 8 . - e54988.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.54988

Rothenhäusler, Florian ; Ouali, Ahmed-Amine ; Rinberg, Roman ; Demleitner, Martin ; Kroll, Lothar ; Ruckdäschel, Holger:
Influence of sodium hydroxide, silane, and siloxane treatments on the moisture sensitivity and mechanical properties of flax fiber composites.
In: Polymer Composites. Vol. 45 (2024) Issue 10 . - pp. 8937-8948.
ISSN 1548-0569
DOI der Verlagsversion: https://doi.org/10.1002/pc.28386

Sunder, Sruthi ; Jauregui Rozo, Maria ; Inasu, Sneha ; Schartel, Bernhard ; Ruckdäschel, Holger:
Investigating the changing dynamics of processing, temperature-based mechanics, and flame retardancy in the transfer of ammonium polyphosphate/inorganic silicate flame retardants from epoxy resins to glass fiber composites.
In: Journal of Applied Polymer Science. Vol. 141 (2024) Issue 39 . - e55988.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.55988

Shah, Karim Ali ; Brütting, Christian ; Albuquerque, Rodrigo Q. ; Ruckdäschel, Holger:
Machine learning investigation of polylactic acid bead foam extrusion.
In: Journal of Applied Polymer Science. Vol. 141 (2024) Issue 30 . - e55693.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.55693

Shah, Karim Ali ; Albuquerque, Rodrigo Q. ; Brütting, Christian ; Ruckdäschel, Holger:
Machine learning-based time series analysis of polylactic acid bead foam extrusion.
In: Journal of Applied Polymer Science. Vol. 141 (2024) Issue 44 . - e56170.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.56170

Hübner, Fabian:
Modifizierte Epoxidharzformulierungen zur Herstellung von kohlenstofffaserverstärkten kryogenen Wasserstoffspeichern im automatisierten Legeverfahren.
Bayreuth , 2024 . - X, 149
( Doctoral thesis, 2024 , University of Bayreuth, Faculty of Engineering Science)

Bauriedel, Niklas ; Albuquerque, Rodrigo Q. ; Utz, Julia ; Geis, Nico ; Ruckdäschel, Holger:
Monitoring of fused filament fabrication (FFF) : An infrared imaging and machine learning approach.
In: Journal of Polymer Science. Vol. 62 (2024) Issue 24 . - pp. 5633-5641.
ISSN 2642-4169
DOI der Verlagsversion: https://doi.org/10.1002/pol.20240586

Himmelsbach, Andreas ; Brütting, Christian ; Akdevelioglu, Yavuz ; Albuquerque, Rodrigo Q. ; Nofar, Mohammadreza ; Ruckdäschel, Holger:
Non-isothermal crystallization kinetic of recycled PET and its blends with PBT modified with epoxy-based multifunctional chain extender.
In: Journal of Applied Polymer Science. Vol. 141 (2024) Issue 19 . - e55357.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.55357

Aksit, Alper:
Properties of Micro- and Nanostructured PA66/PPE Polymer Blends.
Bayreuth , 2024 . - VIII, 153 P.
( Doctoral thesis, 2023 , University of Bayreuth, Faculty of Engineering Science)

Bard, Simon ; Tran, Thomas ; Schönl, Florian ; Rosenfeldt, Sabine ; Demleitner, Martin ; Ruckdäschel, Holger ; Retsch, Markus ; Altstädt, Volker:
Relationship between the tensile modulus and the thermal conductivity perpendicular and in fiber direction of PAN-based carbon fibers.
In: Carbon Letters. (2024) Issue 34 . - pp. 361-369.
ISSN 2233-4998
DOI der Verlagsversion: https://doi.org/10.1007/s42823-023-00568-2

Rothenhäusler, Florian ; Ruckdäschel, Holger:
Strategies for the fast optimization of the glass transition temperature of sustainable epoxy resin systems via machine learning.
In: Journal of Applied Polymer Science. Vol. 141 (2024) Issue 21 . - e55422.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.55422

Sunder, Sruthi ; Jauregui Rozo, Maria ; Inasu, Sneha ; Schartel, Bernhard ; Ruckdäschel, Holger:
A systematic investigation of the transfer of polyphosphate/inorganic silicate flame retardants from epoxy resins to layered glass fiber-reinforced composites and their post-furnace flexural properties.
In: Polymer Composites. Vol. 45 (2024) Issue 10 . - pp. 9389-9406.
ISSN 1548-0569
DOI der Verlagsversion: https://doi.org/10.1002/pc.28416

Freudenberg, Wolfganh ; Wich, Felix ; Best, Jalena ; Moukhina, Elena ; Scherzer, Tim ; Ruckdäschel, Holger ; Langhof, Nico ; Schafföner, Stefan:
Thermo-oxidative crosslinking of carbon fiber reinforced PEEK (Polyetheretherketone) for additive manufactured ceramic matrix composites.
In: Advanced Manufacturing : Polymer & Composites Science. Vol. 10 (2024) Issue 1 . - 2387422.
ISSN 2055-0359
DOI der Verlagsversion: https://doi.org/10.1080/20550340.2024.2387422

Brütting, Christian:
Untersuchung des Schäumverhaltens von Polylactid und Polylactid/Poly(hydroxybutyrat-co-hydroxyvalerat)-Blends in der Partikelschaumextrusion.
Bayreuth , 2024 . - XVII, 131, LXX P.
( Doctoral thesis, 2024 , University of Bayreuth, Faculty of Engineering Science)

Menzel, Teresa:
Von Makro- zu Mikroplastik : Degradationsmodelle und Extrapolation von Verweilzeiten unter abiotischen Umwelteinflüssen.
Bayreuth , 2024 . - xi, 124, xxxvii P.
( Doctoral thesis, 2023 , University of Bayreuth, Faculty of Engineering Science)

2023

Albuquerque, Rodrigo Q. ; Rothenhäusler, Florian ; Ruckdäschel, Holger:
Designing formulations of bio-based, multicomponent epoxy resin systems via machine learning.
In: MRS Bulletin. (30 June 2023) .
ISSN 1938-1425
DOI der Verlagsversion: https://doi.org/10.1557/s43577-023-00504-9

Rothenhäusler, Florian ; Ruckdäschel, Holger:
Amino Acids as Bio-Based Curing Agents for Epoxy Resin : Correlation of Network Structure and Mechanical Properties.
In: Polymers. Vol. 15 (2023) Issue 2 . - 385.
ISSN 2073-4360
DOI der Verlagsversion: https://doi.org/10.3390/polym15020385

Krause, Katharina:
Co-Injektion im Spritzgießen : Sandwichbauteile mit geschäumtem Kern und weichelastischer Haut.
Bayreuth , 2023 . - VI, 131 P.
( Doctoral thesis, 2023 , University of Bayreuth, Faculty of Engineering Science)

Soleimanpour, Amirali ; Khonakdar, Hanieh ; Mousavi, Seyed Rasoul ; Banaei, Nastaran ; Hemmati, Farkhondeh ; Arjmand, Mohammad ; Ruckdäschel, Holger ; Khonakdar, Hossein Ali:
Continuous extrusion foaming process of biodegradable nanocomposites based on poly(lactic acid)/carbonaceous nanoparticles with different geometric shapes : An insight into involved physical, chemical and rheological phenomena.
In: Journal of Applied Polymer Science. Vol. 140 (2023) Issue 19 . - e53822.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.53822

Meuchelböck, Johannes ; Standau, Tobias ; Preiss, Gina ; Müller-Pabel, Michael ; Koch, Ilja ; Grüber, Bernd ; Gude, Maik ; Altstädt, Volker ; Ruckdäschel, Holger:
Effect of density on the fatigue behaviour of EPP and ETPU bead foams.
In: AIP conference proceedings. Vol. 2884 (2023) Issue 1 . - 140002.
ISSN 0094-243X
DOI der Verlagsversion: https://doi.org/10.1063/5.0168270

Du, Ngoc Uy Lan ; Bethke, Christian ; Gong, Shuaiping ; Altstädt, Volker ; Ruckdäschel, Holger:
Foaming epoxy-amine-carbamate : The effect of different neat amines on rheological and cellular morphology.
In: Journal of Cellular Plastics. Vol. 59 (2023) Issue 3 . - pp. 231-247.
ISSN 1530-7999
DOI der Verlagsversion: https://doi.org/10.1177/0021955X231166007

Utz, Julia ; Geis, Nico ; Baur, Maximilian ; Ruckdäschel, Holger:
Influence of glass fibers on the processability and mechanical properties of PP homopolymer for fused filament fabrication (FFF).
In: AIP conference proceedings. Vol. 2607 (2023) Issue 1 . - 120009.
ISSN 0094-243X
DOI der Verlagsversion: https://doi.org/10.1063/5.0136659

Rothenhäusler, Florian ; Kettenbach, Marcel ; Ruckdäschel, Holger:
Influence of the Stoichiometric Ratio on the Curing Kinetics and Mechanical Properties of Epoxy Resin Cured with a Rosin-Based Anhydride.
In: Macromolecular Materials and Engineering. Vol. 308 (2023) Issue 11 . - p. 2300122.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202300122

Rothenhäusler, Florian ; Ruckdäschel, Holger:
Influence of the stoichiometric ratio on the in-situ formation of crystals and the mechanical properties of epoxy resin cured with l-tyrosine.
In: Polymer Engineering & Science. Vol. 63 (2023) Issue 12 . - pp. 4007-4018.
ISSN 1548-2634
DOI der Verlagsversion: https://doi.org/10.1002/pen.26501

Weingart, Nick ; Raps, Daniel ; Lamka, Marc ; Demleitner, Martin ; Altstädt, Volker ; Ruckdäschel, Holger:
Influence of thermo-oxidative aging on the mechanical properties of the bead foams made of polycarbonate and polypropylene.
In: Journal of Polymer Science. Vol. 61 (2023) Issue 21 . - pp. 2742-2757.
ISSN 2642-4169
DOI der Verlagsversion: https://doi.org/10.1002/pol.20230267

Rothenhäusler, Florian ; Ruckdäschel, Holger:
Interplay of curing and thermal degradation in epoxy resins cured with amino acids : Influence of the maximum curing temperature on the network structure, crystal morphology and mechanical properties.
In: Journal of Applied Polymer Science. Vol. 140 (2023) Issue 45 . - e54655.
ISSN 1097-4628
DOI der Verlagsversion: https://doi.org/10.1002/app.54655

Himmelsbach, Andreas ; Standau, Tobias ; Kuhnigk, Justus ; Bubmann, Tobias ; Akdevelioglu, Yavuz ; Nofar, Mohammadreza ; Ruckdäschel, Holger:
Investigation of the Reaction Kinetics of Poly(butylene terephthalate) and Epoxide Chain Extender.
In: Macromolecular Materials and Engineering, Macromolecular Materials and Engineering. Vol. 308 (2023) Issue 7 . - 2200683.
ISSN 1438-7492
DOI der Verlagsversion: https://doi.org/10.1002/mame.202200683

Aksit, Merve:
Low-Density Reactive-Extruded Polybutylene Terephthalate Foams with Enhanced Compressive Properties.
2023 . - XII, 153 P.
( Doctoral thesis, 2023 , University of Bayreuth, Faculty of Engineering Science)

Standau, Tobias:
Polybutylenterephthalat-Partikelschäume mit erhöhter thermischer Beständigkeit : Einfluss eines epoxidbasierten Kettenverlängerers auf Verarbeitung und Eigenschaften.
Bayreuth , 2023 . - XI, 140 P.
( Doctoral thesis, 2023 , University of Bayreuth, Faculty of Engineering Science)

Tayouri, Mohammad Iman ; Estaji, Sara ; Mousavi, Seyed Rasoul ; Yazdanbakhsh, Amirhosein ; Nouranian, Sasan ; Ruckdäschel, Holger ; Khonakdar, Hossein Ali:
Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes : Morphological, Mechanical, and Gas Barrier Properties.
In: Macromolecular Materials and Engineering. Vol. 308 (2023) Issue 9 . - 2300080.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202300080

Obermeier, Frederik:
Prozess- und materialtechnische Entwicklung von thermoplastischen Hybridverbunden mit Holzfaserverstärkung.
Bayreuth , 2023 . - 149 P.
( Doctoral thesis, 2023 , University of Bayreuth, Faculty of Engineering Science)

Standau, Tobias ; Himmelsbach, Andreas ; Stierle, Catharina ; Meuchelböck, Johannes ; Altstädt, Volker ; Ruckdäschel, Holger:
Quantification of the resistance against deformation under thermal load of different polymeric foams by a novel measuring approach.
In: AIP conference proceedings. Vol. 2884 (2023) Issue 1 . - 140001.
ISSN 0094-243X
DOI der Verlagsversion: https://doi.org/10.1063/5.0168326

Brütting, Christian ; Standau, Tobias ; Meuchelböck, Johannes ; Schreier, Peter ; Ruckdäschel, Holger:
A review on semi-crystalline polymer bead foams from stirring autoclave : Processing and properties.
In: e-Polymers. Vol. 23 (2023) Issue 1 . - 2023009.
ISSN 1618-7229
DOI der Verlagsversion: https://doi.org/10.1515/epoly-2023-0092

Albuquerque, Rodrigo Q. ; Meuchelböck, Johannes ; Ruckdäschel, Holger:
A unified approach for evaluating mechanical compression tests for polymer bead foams.
In: Journal of Polymer Science. (2023) . - pp. 1-10.
ISSN 2642-4169
DOI der Verlagsversion: https://doi.org/10.1002/pol.20230704

2022

Meides, Nora ; Mauel, Anika ; Menzel, Teresa ; Altstädt, Volker ; Ruckdäschel, Holger ; Senker, Jürgen ; Strohriegl, Peter:
Quantifying the fragmentation of polypropylene upon exposure to accelerated weathering.
In: Microplastics and Nanoplastics. Vol. 2 (21 September 2022) Issue 1 . - No. 23.
ISSN 2662-4966
DOI der Verlagsversion: https://doi.org/10.1186/s43591-022-00042-2

Bubmann, Tobias:
Transparente PC/PMMA Blends : Einfluss der Funktionalisierung auf optische, morphologische und mechanische Eigenschaften.
Bayreuth , 2022 . - X, 169 P.
( Doctoral thesis, 2022 , University of Bayreuth, Faculty of Engineering Science)

Utz, Julia ; Zubizarreta, Jokin ; Geis, Nico ; Immonen, Kirsi ; Kangas, Heli ; Ruckdäschel, Holger:
3D Printed Cellulose-Based Filaments—Processing and Mechanical Properties.
In: Materials. Vol. 15 (2022) Issue 19 . - No. 6582.
ISSN 1996-1944
DOI der Verlagsversion: https://doi.org/10.3390/ma15196582

Heinz, Michael ; Callsen, Christoph ; Stöcklein, Waldemar ; Altstädt, Volker ; Ruckdäschel, Holger:
Halogen-free flame-retardant cable compounds : Influence of magnesium-di-hydroxide filler and coupling agent on EVA/LLDPE blend system morphology.
In: Polymer Engineering & Science. Vol. 62 (2022) Issue 2 . - pp. 461-471.
ISSN 1548-2634
DOI der Verlagsversion: https://doi.org/10.1002/pen.25858

Kuhnigk, Justus ; Krebs, Niko ; Standau, Tobias ; Dippold, Marcel ; Ruckdäschel, Holger:
Evaluation of the Fusion Quality of Bead Foams Made from Polybutylene Terephthalate (E-PBT) Depending on the Processing Temperature.
In: Macromolecular Materials and Engineering. Vol. 307 (2022) Issue 11 . - No. 2200419.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202200419

Nofar, Mohammadreza ; Utz, Julia ; Geis, Nico ; Altstädt, Volker ; Ruckdäschel, Holger:
Foam 3D Printing of Thermoplastics : A Symbiosis of Additive Manufacturing and Foaming Technology.
In: Advanced Science. Vol. 9 (2022) Issue 11 . - No. 2105701.
ISSN 2198-3844
DOI der Verlagsversion: https://doi.org/10.1002/advs.202105701

Brütting, Christian ; Dreier, Julia ; Bonten, Christian ; Altstädt, Volker ; Ruckdäschel, Holger:
Glass transition of PLA-CO₂ mixtures after solid-state saturation.
In: Journal of Cellular Plastics. Vol. 58 (2022) Issue 6 . - pp. 917-931.
ISSN 1530-7999
DOI der Verlagsversion: https://doi.org/10.1177/0021955X221144543

Demleitner, Martin ; Schönl, Florian ; Angermann, Jörg ; Fässler, Pascal ; Lamparth, Iris ; Rist, Kai ; Schnur, Thomas ; Catel, Yohann ; Rosenfeldt, Sabine ; Retsch, Markus ; Ruckdäschel, Holger ; Altstädt, Volker:
Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV-curable Methacrylate Resin Systems.
In: Macromolecular Materials and Engineering. Vol. 307 (2022) Issue 10 . - No. 2200320.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202200320

Rothenhäusler, Florian ; Ruckdäschel, Holger:
l-Arginine as a Bio-Based Curing Agent for Epoxy Resins : Glass Transition Temperature, Rheology and Latency.
In: Polymers. Vol. 14 (2022) Issue 20 . - No. 4331.
ISSN 2073-4360
DOI der Verlagsversion: https://doi.org/10.3390/polym14204331

Rothenhäusler, Florian ; Ruckdäschel, Holger:
l-Arginine as Bio-Based Curing Agent for Epoxy Resins : Temperature-Dependence of Mechanical Properties.
In: Polymers. Vol. 14 (2022) Issue 21 . - No. 4696.
ISSN 2073-4360
DOI der Verlagsversion: https://doi.org/10.3390/polym14214696

Albuquerque, Rodrigo Q. ; Brütting, Christian ; Standau, Tobias ; Ruckdäschel, Holger:
A machine learning investigation of low-density polylactide batch foams.
In: e-Polymers. Vol. 22 (2022) Issue 1 . - pp. 318-331.
ISSN 1618-7229
DOI der Verlagsversion: https://doi.org/10.1515/epoly-2022-0031

Meier, Sven ; Albuquerque, Rodrigo Q. ; Demleitner, Martin ; Ruckdäschel, Holger:
Modeling glass transition temperatures of epoxy systems : a machine learning study.
In: Journal of Materials Science. Vol. 57 (2022) Issue 29 . - pp. 13991-14002.
ISSN 1573-4803
DOI der Verlagsversion: https://doi.org/10.1007/s10853-022-07372-9

2021

Hübner, Fabian ; Brückner, Alexander ; Dickhut, Tobias ; Altstädt, Volker ; Rios de Anda, Agustín ; Ruckdäschel, Holger:
Low temperature fatigue crack propagation in toughened epoxy resins aimed for filament winding of type V composite pressure vessels.
In: Polymer Testing. Vol. 102 (October 2021) . - No. 107323.
ISSN 1873-2348
DOI der Verlagsversion: https://doi.org/10.1016/j.polymertesting.2021.107323

Brütting, Christian ; Dreier, Julia ; Bonten, Christian ; Altstädt, Volker ; Ruckdäschel, Holger:
Amorphous Polylactide Bead Foam : Effect of Talc and Chain Extension on Foaming Behavior and Compression Properties.
In: Journal of Renewable Materials. Vol. 9 (2021) Issue 11 . - pp. 1859-1868.
ISSN 2164-6341
DOI der Verlagsversion: https://doi.org/10.32604/jrm.2021.016244

Koedel, Justus ; Seibt, Sebastian ; Callsen, Christoph ; Puchtler, Florian ; Weise, Markus ; Weidinger, Andy ; Altstädt, Volker ; Ruckdäschel, Holger ; Schobert, Rainer ; Biersack, Bernhard:
DNA as a Natural Flame Retardant for Cellulose Acetate Polymer Mixtures.
In: ChemistrySelect. Vol. 6 (2021) Issue 15 . - pp. 3605-3609.
ISSN 2365-6549
DOI der Verlagsversion: https://doi.org/10.1002/slct.202004493

Menzel, Teresa ; Weigert, Sebastian ; Gagsteiger, Andreas ; Eich, Yannik ; Sittl, Sebastian ; Papastavrou, Georg ; Ruckdäschel, Holger ; Altstädt, Volker ; Höcker, Birte:
Impact of Enzymatic Degradation on the Material Properties of Poly(Ethylene Terephthalate).
In: Polymers. Vol. 13 (2021) Issue 22 . - No. 3885.
ISSN 2073-4360
DOI der Verlagsversion: https://doi.org/10.3390/polym13223885

Kuhnigk, Justus ; Raps, Daniel ; Standau, Tobias ; Luik, Marius ; Altstädt, Volker ; Ruckdäschel, Holger:
Insights into the Bead Fusion Mechanism of Expanded Polybutylene Terephthalate (E-PBT).
In: Polymers. Vol. 13 (2021) Issue 4 . - No. 582.
ISSN 2073-4360
DOI der Verlagsversion: https://doi.org/10.3390/polym13040582

Kaysser, Simon T. ; Bethke, Christian ; Romero, Isabel Fernandez ; Wei, Angeline Wo Weng ; Keun, Christian A. ; Ruckdäschel, Holger ; Altstädt, Volker:
Investigations on Epoxy-Carbamate Foams Modified with Different Flame Retardants for High-Performance Applications.
In: Polymers. Vol. 13 (2021) Issue 22 . - No. 3893.
ISSN 2073-4360
DOI der Verlagsversion: https://doi.org/10.3390/polym13223893

Du Ngoc, Uy Lan ; Bethke, Christian ; Altstädt, Volker ; Ruckdäschel, Holger:
New Insights on Expandability of Pre-Cured Epoxy Using a Solid-State CO₂-Foaming Technique.
In: Polymers. Vol. 13 (2021) Issue 15 . - No. 2441.
ISSN 2073-4360
DOI der Verlagsversion: https://doi.org/10.3390/polym13152441

Bethke, Christian ; Goller, Sebastian Manfred ; Du Ngoc, Uy Lan ; Kaysser, Simon T. ; Altstädt, Volker ; Ruckdäschel, Holger:
Tailoring Epoxy Resin Foams by Pre-Curing with Neat Amine Hardeners and Its Derived Carbamates.
In: Polymers. Vol. 13 (2021) Issue 8 . - No. 1348.
ISSN 2073-4360
DOI der Verlagsversion: https://doi.org/10.3390/polym13081348