Institutions of the University of Bayreuth
|
One level up ... |
Vogler, Jonas ; Schneiderman, Benjamin ; Yu, Zhenzhen ; Huber, Jakob ; Völkl, Rainer ; Glatzel, Uwe:
Compositionally Complex Alloy MnFeCoNiCu for Brazing Nickel-Based Superalloy Haynes 214.
In: Advanced Engineering Materials.
Vol. 26
(2024)
Issue 14
.
- 2400747.
ISSN 1527-2648
DOI der Verlagsversion: https://doi.org/10.1002/adem.202400747
Gottwalt-Baruth, Albin:
Mechanisches Ermüdungsverhalten von Elektroblechen.
Bayreuth
,
2024
. - II, 123 P.
ISBN 978-3-8440-9412-1
(
Doctoral thesis,
2023
, University of Bayreuth, Faculty of Engineering Science)
Dickes, Daniel:
Oxide layer and diffusion zone formation during oxidation of Ti6Al4V and TiZrNbHfTa and their influence on tribological properties.
Bayreuth
:
EPub Bayreuth
,
2024
. - IV, 112 P.
- (Berichte aus der Materialwissenschaft
)
(
Doctoral thesis,
2023
, University of Bayreuth, Faculty of Engineering Science)
Müller, Moritz ; Böttger, Bernd ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe:
3D Minimum Channel Width Distribution in a Ni Base Superalloy.
In: Integrating Materials and Manufacturing Innovation.
Vol. 12
(2023)
.
- pp. 27-40.
ISSN 2193-9772
DOI der Verlagsversion: https://doi.org/10.1007/s40192-022-00290-3
Schleifer, Felix ; Lin, Yueh-Yu ; Glatzel, Uwe ; Fleck, Michael:
The Elastic Effect of Evolving Precipitate Shapes on the Ripening Kinetics of Tetragonal Phases.
In: Metallurgical and Materials Transactions A.
Vol. 54
(2023)
Issue 5
.
- pp. 1843-1856.
ISSN 1543-1940
DOI der Verlagsversion: https://doi.org/10.1007/s11661-022-06877-x
Schlereth, Clara:
Umgebungseinfluss auf die Oxidschichtbildung in befeuchteter Luft und bei Metal Dusting-Bedingungen.
Bayreuth
,
2023
. - IX, 121 P.
(
Doctoral thesis,
2023
, University of Bayreuth, Faculty of Engineering Science)
Schleifer, Felix ; Müller, Moritz ; Lin, Yueh-Yu ; Holzinger, Markus ; Glatzel, Uwe ; Fleck, Michael:
Consistent Quantification of Precipitate Shapes and Sizes in Two and Three Dimensions Using Central Moments.
In: Integrating Materials and Manufacturing Innovation.
Vol. 11
(April 2022)
.
- pp. 159-171.
ISSN 2193-9772
DOI der Verlagsversion: https://doi.org/10.1007/s40192-022-00259-2
Körber, Selina ; Fleck, Michael ; Völkl, Rainer ; Glatzel, Uwe:
Anisotropic Growth of the Primary Dendrite Arms in a Single-Crystal Thin-Walled Nickel-Based Superalloy.
In: Advanced Engineering Materials.
Vol. 24
(2022)
Issue 6
.
- No. 2101332.
ISSN 1527-2648
DOI der Verlagsversion: https://doi.org/10.1002/adem.202101332
Dickes, Daniel ; Öztürk, Beyza ; Völkl, Rainer ; Galetz, Mathias ; Glatzel, Uwe:
Improving the Adhesion of a Hard Oxide Layer on Ti6Al4V by a Three-Step Thermal Oxidation Process.
In: Advanced Engineering Materials.
Vol. 24
(2022)
Issue 3
.
- No. 2100864.
ISSN 1527-2648
DOI der Verlagsversion: https://doi.org/10.1002/adem.202100864
Mosbacher, Mike ; Holzinger, Markus ; Galetz, Mathias ; Glatzel, Uwe:
The Influence of Oxide Color on the Surface Characteristics of Zirconium Alloy ZrNb₇ (wt%) After Different Heat Treatments.
In: Oxidation of Metals.
Vol. 95
(2021)
Issue 5
.
- pp. 377-388.
ISSN 1573-4889
DOI der Verlagsversion: https://doi.org/10.1007/s11085-021-10030-1
Schleifer, Felix:
Simulation der Reifung von γ″-Ausscheidungen in der Legierung IN718.
Bayreuth
,
2021
. - II,125 P.
(
Doctoral thesis,
2021
, University of Bayreuth, Faculty of Engineering Science)
DOI der Verlagsversion: https://doi.org/10.2370/9783844081930
Hackenschmidt, Reinhard ; Wallmann, Clemens:
Die Entwicklung einer Mokkatasse : Bericht über Erfahrungen mit der Prozesskette beim Implementieren eines neuen Herstellungsverfahrens.
2001
Event: Internationales Pro/USER Anwendertreffen in Bayreuth (Bayreuther 3D-Konstrukteurstag)
, 26. September 2001
, Bayreuth.
(Conference item: Conference
,
Speech
)