Properties of Styrene-Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Ether) Blends : Effect of Blend Ratio and Compatibilizer Content

DOI zum Zitieren der Version auf EPub Bayreuth: https://doi.org/10.15495/EPub_UBT_00005557
URN to cite this document: urn:nbn:de:bvb:703-epub-5557-0

Title data

Aksit, Alper ; Geis, Nico ; Aksit, Merve ; Altstädt, Volker:
Properties of Styrene-Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Ether) Blends : Effect of Blend Ratio and Compatibilizer Content.
In: Materials. Vol. 13 (July 2020) Issue 15 . - No. 3400.
ISSN 1996-1944
DOI der Verlagsversion: https://doi.org/10.3390/ma13153400

	Format: PDF Name: materials-13-03400-v3.pdf Version: Published Version Available under License Creative Commons BY 4.0: Attribution
	Download (8MB)

Project information

Project title:	Project's official title Project's id Open Access Publizieren No information

Abstract

Two different blend ratios of polyamide 66 (PA66) and poly (2,6-dimethyl-1,4-phenylene ether) (PPE) (60/40 and 40/60 w/w) were produced via melt mixing. A styrene–maleic anhydride copolymer (SMA) was utilized at various contents from 2.5–15 wt% to compatibilize the immiscible blend system. The influence of SMA content and blend ratio was investigated based on (thermo-) mechanical and morphological properties of the PA66/PPE blends. Correlations between the interaction of SMA with the blend partners were established. For 60/40 blends, a droplet-sea morphology was visualized by transmission electron microscopy, wherein no major changes were seen upon SMA addition. In the case of 40/60 blends, strong coalescence was found in the binary blend. Up to 5 wt% SMA, the coalescence was inhibited by the interfacial activity of SMA, whereas 10 wt% SMA initiated a disperse-to-co-continuous transition, which was completed at 15 wt% SMA. An enhancement of tensile properties was achieved for all blends possessing SMA, where the maximum concentration of 15 wt% resulted in the highest elongation at break and tensile strength values. The relative improvement of the tensile properties was higher with the PPE-rich blend (40/60) which was attributed to a partial emulsification of the PPE phases forming a bimodal PPE domain size distribution with nano-droplets in the range of 60–160 nm.

Further data

Item Type:	Article in a journal
Keywords:	PA66; PPE; blend ratio; compatibilization; SMA; morphology; mechanical properties
DDC Subjects:	500 Science 500 Science > 540 Chemistry 600 Technology, medicine, applied sciences > 620 Engineering 600 Technology, medicine, applied sciences > 660 Chemical engineering
Institutions of the University:	Faculties > Faculty of Engineering Science > Former Professors > Chair Polymer Materials - Univ.-Prof. Dr.-Ing. Volker Altstädt Research Institutions Research Institutions > Central research institutes Research Institutions > Central research institutes > Bayreuth Institute of Macromolecular Research - BIMF Research Institutions > Affiliated Institutes Research Institutions > Affiliated Institutes > Bavarian Polymer Institute (BPI) Faculties Faculties > Faculty of Engineering Science Faculties > Faculty of Engineering Science > Chair Polymer Materials Faculties > Faculty of Engineering Science > Former Professors
Language:	English
Originates at UBT:	Yes
URN:	urn:nbn:de:bvb:703-epub-5557-0
Date Deposited:	19 May 2021 10:13
Last Modified:	19 May 2021 10:13
URI:	https://epub.uni-bayreuth.de/id/eprint/5557

Download Statistics

Download Statistics

Download Statistics

Downloads

Downloads per month over past year