Radio-Frequency-Based NH₃-Selective Catalytic Reduction Catalyst Control : Studies on Temperature Dependency and Humidity Influences

Titelangaben

Dietrich, Markus ; Hagen, Gunter ; Reitmeier, Willibald ; Burger, Katharina ; Hien, Markus ; Grass, Philippe ; Kubinski, David J. ; Visser, Jacobus H. ; Moos, Ralf:
Radio-Frequency-Based NH₃-Selective Catalytic Reduction Catalyst Control : Studies on Temperature Dependency and Humidity Influences.
In: Sensors. Bd. 17 (2017) Heft 7 . - Article number: 1615.
ISSN 1424-8220
DOI der Verlagsversion: https://doi.org/10.3390/s17071615

Volltext

	Format: PDF Name: sensors-17-01615.pdf Version: Veröffentlichte Version Verfügbar mit der Lizenz Creative Commons BY 4.0: Namensnennung
	Download (2MB)

Abstract

The upcoming more stringent automotive emission legislations and current developments have promoted new technologies for more precise and reliable catalyst control. For this purpose, radio-frequency-based (RF) catalyst state determination offers the only approach for directly measuring the NH3 loading on selective catalytic reduction (SCR) catalysts and the state of other catalysts and filter systems. Recently, the ability of this technique to directly control the urea dosing on a current NH3 storing zeolite catalyst has been demonstrated on an engine dynamometer for the first time and this paper continues that work. Therefore, a well-known serial-type and zeolite-based SCR catalyst (Cu-SSZ-13) was investigated under deliberately chosen high space velocities. At first, the full functionality of the RF system with Cu-SSZ-13 as sample was tested successfully. By direct RF-based NH3 storage control, the influence of the storage degree on the catalyst performance, i.e., on NOx conversion and NH3 slip, was investigated in a temperature range between 250 and 400 °C. For each operation point, an ideal and a critical NH3 storage degree was found and analyzed in the whole temperature range. Based on the data of all experimental runs, temperature dependent calibration functions were developed as a basis for upcoming tests under transient conditions. Additionally, the influence of exhaust humidity was observed with special focus on cold start water and its effects to the RF signals.