Zeitschrift: Macromolecular Materials and Engineering

Eine Ebene nach oben ...
Exportieren als [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Gruppieren nach: Jahr | Person | Keine Gruppierung
Springe zu: 2023 | 2022 | 2021 | 2020
Anzahl der Einträge: 11.

2023

Rothenhäusler, Florian ; Kettenbach, Marcel ; Ruckdäschel, Holger:
Influence of the Stoichiometric Ratio on the Curing Kinetics and Mechanical Properties of Epoxy Resin Cured with a Rosin-Based Anhydride.
In: Macromolecular Materials and Engineering. Bd. 308 (2023) Heft 11 . - S. 2300122.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202300122

Tayouri, Mohammad Iman ; Estaji, Sara ; Mousavi, Seyed Rasoul ; Yazdanbakhsh, Amirhosein ; Nouranian, Sasan ; Ruckdäschel, Holger ; Khonakdar, Hossein Ali:
Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes : Morphological, Mechanical, and Gas Barrier Properties.
In: Macromolecular Materials and Engineering. Bd. 308 (2023) Heft 9 . - 2300080.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202300080

2022

Venkateshaiah, Abhilash ; Timmins, Renee ; Sehl, Elmar ; Wacławek, Stanisław ; Černík, Miroslav ; Padil, Vinod V. T. ; Agarwal, Seema:
High Barrier, Biodegradable Nanocomposite Films Based on Clay‐Coated and Chemically Modified Gum Kondagogu.
In: Macromolecular Materials and Engineering. Bd. 307 (1 August 2022) Heft 8 . - No. 2200008.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202200008

Müller, Ann-Kathrin ; Xu, Zhi‐Kang ; Greiner, Andreas:
Filtration of Paint‐Contaminated Water by Electrospun Membranes.
In: Macromolecular Materials and Engineering. Bd. 307 (2022) Heft 10 . - No. 2200238.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202200238

Timmins, Renee ; Kumar, Anil ; Röhrl, Maximilian ; Havlíček, Karel ; Agarwal, Seema ; Breu, Josef:
High Barrier Nanocomposite Film with Accelerated Biodegradation by Clay Swelling Induced Fragmentation.
In: Macromolecular Materials and Engineering. Bd. 307 (2022) Heft 6 . - No. 2100727.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202100727

Kuhnigk, Justus ; Krebs, Niko ; Standau, Tobias ; Dippold, Marcel ; Ruckdäschel, Holger:
Evaluation of the Fusion Quality of Bead Foams Made from Polybutylene Terephthalate (E-PBT) Depending on the Processing Temperature.
In: Macromolecular Materials and Engineering. Bd. 307 (2022) Heft 11 . - No. 2200419.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202200419

Demleitner, Martin ; Schönl, Florian ; Angermann, Jörg ; Fässler, Pascal ; Lamparth, Iris ; Rist, Kai ; Schnur, Thomas ; Catel, Yohann ; Rosenfeldt, Sabine ; Retsch, Markus ; Ruckdäschel, Holger ; Altstädt, Volker:
Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV-curable Methacrylate Resin Systems.
In: Macromolecular Materials and Engineering. Bd. 307 (2022) Heft 10 . - No. 2200320.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202200320

2021

Kumar, Anil ; Weig, Alfons ; Agarwal, Seema:
Balancing Degradability and Physical Properties of Amorphous Poly (D, L‐lactide) by Making Blends.
In: Macromolecular Materials and Engineering. Bd. 307 (17 September 2021) Heft 6 . - No. 2100602.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202100602

Jin, Minde ; Stihl, Markus ; Giesa, Reiner ; Neuber, Christian ; Schmidt, Hans-Werner:
(AB)n Segmented Copolyetherimides for 4D Printing.
In: Macromolecular Materials and Engineering. Bd. 306 (2021) Heft 1 . - No. 2000473. - 9 S.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202000473

Neumann, Simon ; Hu, Pin ; Bretschneider, Felix ; Schmalz, Holger ; Greiner, Andreas:
Blends of Bio-Based Poly(Limonene Carbonate) with Commodity Polymers.
In: Macromolecular Materials and Engineering. Bd. 306 (2021) Heft 7 . - No. 2100090.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.202100090

2020

Liao, Xiaojian ; Hu, Pin ; Agarwal, Seema ; Greiner, Andreas:
Impact of the Fiber Length Distribution on Porous Sponges Originating from Short Electrospun Fibers Made from Polymer Yarn.
In: Macromolecular Materials and Engineering. Bd. 305 (2020) Heft 2 . - No. 1900629.
ISSN 1439-2054
DOI der Verlagsversion: https://doi.org/10.1002/mame.201900629

Diese Liste wurde am Thu Mar 28 01:57:51 2024 CET generiert.
[Zum Seitenanfang]